Google Wi-Fi is a set of devices capable of providing internet connective in a large or high reaching area thus, it does not really create a difference that your home is farfetched or elevated, Google Wi-Fi will let you access to the internet in every corner of your home. We assure you that the connectivity will be better if you have place mesh devices according to the suggestion given by us.
To know about the placement of the devices, practice the following steps.
- Let it be any router (a device used to provide internet connectivity) it offers signals in a circular manner which means it will cover a similar area in all the directions be it north, south, east or west. With the help of mesh devices position, in the connectivity range of the main device will let you cover more distance. However, you must keep in mind the positioning of the device, firstly within the range of primary device and secondly, it should be placed overhead or beneath the place of the main device. This will pass a better signal and your device will function well.
- Since you are aware that the signal is in circle form so, if the signals from the primary device are unable to reach the mesh devices wirelessly then, you should try using a wired connection. This can take place with the help of Ethernet cable, which you can attach in the respective ports.
- The major problem in ‘Home Wi-Fi’ is the material of the home. All the houses are constructed using a different kinds of materials such as wood, stones, bricks etc. These are some hard materials that will not let the signal pass by. Thus, there is a loss of speed as internet connectivity is minimal. Here again, you can apply the same solution of connecting the primary node to the mesh nodes with the help of Ethernet Cable, it will pass on signal constantly and you will have a stable connection in your home.
- You can experience high-speed internet connection in the places where you usually experience low signals. As Google Wi-Fi router comes in the set of two, which can be placed parallel to each other or can be connected with Ethernet cable and you will achieve high-speed internet flow on your premises.
To summarize, Google Wi-Fi routers are efficient devices that can let you have internet connection in multiplex buildings. All you have to do, it does arrange these devices in a specified manner. The add-on routers are to be kept parallel to the primary node. However, there can the problems depending upon the width of the wall coming between the routers. A wall consists of complex material and you cannot expect the wireless signal to be strong enough to pass through. This scenario demands the use of Ethernet cables. For more information click at Google Wifi Router Setup.